Shower Melts

You see them everywhere. Bath bombs, bath salts, shower gels all make your own or DIY!
Mom and I thought it would be fun to make our own. We settled on our recipe, shopped the hobby store for our molds and coloring. We decided on cute silicone candy molds and some regular plastic molds in the soap aisle. We were set! Then we had to find more than a small box of baking soda; off to the big box store to purchase a HUGE bag, the essential oils we already had. Breathe, Eucalyptus, Lavender, Tea Tree, Peppermint, Wild Orange and more. We are going to have some fun!
(Thank you Busy Bliss for your recipe)

 Shower Melts Recipe

Ingredients

  • 1 cup baking soda
  • 2-5 tablespoons water
  • 10 drops eucalyptus essential oil
  • 10 drops peppermint essential oil
  • 10 drops lavender essential oil
  • (or your own combination of oils)
  • Soap colorant (optional)
  • Silicone mold (this is similar to what we used)
We found you can use cake, candy, cupcake, soap and candle silicone molds.

Directions

Add baking soda to a glass or metal bowl.
Slowly mix water with baking soda one tablespoon at a time until you reach a thick paste consistency.  You may not need 5 full tablespoons, you may need a bit more.

 

Add in your essential oil and soap colorant if using and mix well.  We used colors which coordinated (or tried to coordinate with the scent of the melts)   I used 15 – 20 drops of each oil because we wanted a stronger scent.  If you find it’s not strong enough, you can also add a drop of oil to the finished melt right before you get in the shower. We found our colorants at Hobby Lobby and chose the primary colors first; second round was lilac, peach and sea foam. They are reasonably priced at both there or at Amazon. The primary colorants work well as you can mix these to make more colors than just the three. This is what the mixture looks like after the soap coloring is added.  It’s a little like wet sand.

 

Press your mixture firmly into your mold.  It may get watery at the top once it settles.  Just take a paper towel and blot the water away.  Put it in the freezer to dry.
After about an hour, your shower melts are ready to use (if you leave them in longer, they seem to collect more moisture and crumbles easily when removing them from the mold.  Store them in a dry, airtight container for 1-2 months.

 

Every gift which is given, even though it be small, is in reality great, if it is given with affection.

Pindar

This post contains affiliate links. If you make a purchase using my link, I will receive compensation at no additional cost to you.

 

DK

Advertisements

Try it Thursday: Christmas in July

OK, I know it’s not July still, but I thought about doing Christmas in July too late. So, I will be doing some more random ones through the rest of the holiday season.
Today we do another tree. I already had the form so I was saving money. Right?
I found several different instructions and since I am working with a budget, I found I really liked the one with buttons. I LOVE to collect buttons, I have some of my grandfathers, some new ones, some from the store, but I had to purchase some gold(ish) ones for the look I wanted. I didn’t use any of the fancy buttons of my grandfathers, saving those for something else.
Off to the hobby store to find some gold or Christmasy buttons. B was in the car with me, in fact he was driving, so he also got the pleasure of taking me to the hobby store. I have to say, he is not one for the hobby stores, but he does make times fun. I’ve learned  to play WITH the shenanigans instead of against them. Usually we end up with lots of people laughing with us, which is better than laughing AT us…which that happens too.
Bruce
Yes, I LOVE going to the hobby store
Anywho Back on track.
I had my tree form, buttons, stick pins and glue gun.
Glue gun wasn’t in the project, however, when I got to pinning, there were gaps and instead of the pin heads on the teeny tiny buttons, I just glued them on.
Start from the bottom of the form and work your way up, I found it easier to use bigger buttons on the bottom and then different sizes on the way up. Make sure you secure the button with a stick pin (and maybe even a splash of hot glue). I choose the pin heads with a white pearl color instead of just a white; I wanted red, but didn’t find any. I found a small box of the pins for just $4.99 for 150, my buttons were on sale for 50% off (regular price was $5.99 for 32) for just $3.00; the cost of the tree, just about $10.
Randomly add your buttons all the way up, took me about 45 minutes to complete. May have taken just a little less if I hadn’t decided to hot glue a button to my finger. Yes, it stuck, yes it burned and yes, it blistered. I know, I know, I gave the PSA about using HOT glue guns, which makes this even worse to tell. Once I started, I thought of all kinds of other things I could do to this, but I just didn’t have the buttons I really wanted.
Since I had a Christmas back drop, I took a “family” photo of the trees
the three.png
Hope you enjoyed the Tree Series. Next week, Peaches!!! It’s harvest time!
“The discipline of creation, be it to paint, compose, write, is an effort towards wholeness.”
― Madeleine L’Engle,
DK

Try it Thursday: Christmas in July

I know, I know. It’s too early to start thinking about Christmas. Evidently, Michaels and Walmart thought so too. Hobby Lobby had my number though, they realize it takes crafters more than just a week or two to craft items. B was not at all happy about this, so he just dropped me off and went to the hardware store, it’s easier on us both if he doesn’t craft shop with me.
My shopping list:
Styrofoam/floral styrofoam cones (I got different sizes)
Glue (just plain old white glue, I did opt for the clear though)
Spray Glue
Decorations
Glue gun/sticks
What I didn’t have on the list, but needed:
Yarn
Embroidery thread
saran wrap
Starch (I used what I had on hand for ironing)
Christmas Trees 
I found these instructions when I was madly pinning one night, so I tucked them in one of my boards, at the time, I just glanced over them. You will find, I do this a lot and sometimes, not always, it comes back to bite me in the rear. This time, I went back to the ones I had saved on my Pinterest boards and they were all in Spanish. Don’t worry, I studied the pictures, however, that may have lost something in translation, but it’s all I had to go on.
The instructions had pictures of both with either yarn or embroidery thread. I liked the thread idea as it wasn’t as bulking as the yarn, did I make a good choice? Stay tuned. Mom and I have stashes of both the thread and the yarn, so there was no need to purchase anymore as we have our own little craft shop in the closets…hiding… Next was to decide, thread or yarn, or both! I chose both. I had two forms, let’s try them out at the same time.
I found the colors closest to Christmas (soon found this would be great for any holiday really). What was in my arsenal were reds, blues, greens, whites and greys; so I choose greys and white for the first tree of thread and in my yarn stash, I chose light green and white.
I set up my table with my forms (I chose two sizes) newspaper, my choices of thread, a small Tupperware bowl and my glue.
Step 1: Untangle the thread, put it in the bowl, then poured glue on top of it. Remember when you were a kid and you put glue on your hands and peeled it off? Best thing EVER! You will get to do that again!
I didn’t remove the plastic wrap on the forms as it’s in experimental stages right now, I’m trying everything. If you wanted to, this would be when you would wrap your form in plastic.
Step 2a: Take the end of the thread (I didn’t separate the thread, it’s your choice if you want the fuller or skinnier effect), make sure it has plenty of school glue on it then stick it to the lowest part of the form. Wrap the thread around a few times to make sure it has a sturdy support system, then wrap the thread up and around the form, making sure you always have plenty of glue on the thread. I did two skeins of the lighter grey and two skeins of the white.  Once I had it all wrapped like I wanted, I had to find my fingers in all the glue, so a quick trip to the sink to wash off my hands.
Step 2b: I did the same thing on the larger form, except, I used the spray glue. I lightly sprayed the form still in the plastic wrap, then wrapped some of the yarn up the form, making sure I had a nice foundation on the bottom of the forms so it would be able to stand. When I got about half way up the form, I lightly sprayed the already wrapped yarn and repeated wrapping and spraying until I had the coverage how I wanted.
***Note: you should do this outside for better ventilation. Also, I held the form as I sprayed it, it may have worked better if I had it sitting on some newspaper. Why? I glued my feet to the porch from the falling glue. Just sayin…
Part 3: Patience is a virtue~ Let the form set overnight or at least a couple of hours just to make sure it’s good and dry.
Part 4: Now, it’s time to remove them.
With the regular school glue, I went around the form and kind of squeezed it lightly and twisted to loosen it from the plastic wrap. Just another note, if you use the plastic wrap on the form, take off the sticker of identification, the glue loves to stick to that and I ended up with a weak area where the sticker was. Took some time to get it loose, but I also didn’t want to compromise it’s structural integrity, after all I was building a forest.   Time was not my friend on this one, after a few hours,  it started to droop a bit, so I went and found the starch and I sprayed that on the starch the tree. I did just a little bit at a time just to make sure it was evenly coated and because I didn’t want it too stiff, but no longer sagging.
20293086_10213130479752840_7277744060610208040_n
Thread tree
The form with the spray glue and yarn didn’t work out so well. It wanted to stick to that plastic and forget about getting it off of the sticker. I ended up cutting off the plastic wrap and removing the form that way, instead of just sliding it like I had done with the thread. After I removed the yarn from the plastic wrap (it was very sticky, but still usable), I used yarn and thread to make a new one, I did the school glue method again and I wrapped first with thread and then with yarn.
Adding decorations:
 
Even though the craft store had it’s Christmas crafting goodies out, they didn’t have any tiny decorations I was looking for, so I improvised. I purchased some of the berry sticks from the floral department and then snipped them off the branch to use. I used the glue gun, please remember, they can be a HOT glue gun and the glue does get HOT!
The white one is the thread one. I think if I had used more thread, it may have stood up better. And yes, the white one is leaning.
If one takes pride in one’s craft, you won’t let a good thing die. Risking it through not pushing hard enough is not a humility.
Paul Keating
DK