I know, I know. It’s too early to start thinking about Christmas. Evidently, Michaels and Walmart thought so too. Hobby Lobby had my number though, they realize it takes crafters more than just a week or two to craft items. B was not at all happy about this, so he just dropped me off and went to the hardware store, it’s easier on us both if he doesn’t craft shop with me.
My shopping list:
Styrofoam/floral styrofoam cones (I got different sizes)
Glue (just plain old white glue, I did opt for the clear though)
What I didn’t have on the list, but needed:
Starch (I used what I had on hand for ironing)
I found these instructions when I was madly pinning one night, so I tucked them in one of my boards, at the time, I just glanced over them. You will find, I do this a lot and sometimes, not always, it comes back to bite me in the rear. This time, I went back to the ones I had saved on my Pinterest boards and they were all in Spanish. Don’t worry, I studied the pictures, however, that may have lost something in translation, but it’s all I had to go on.
The instructions had pictures of both with either yarn or embroidery thread. I liked the thread idea as it wasn’t as bulking as the yarn, did I make a good choice? Stay tuned. Mom and I have stashes of both the thread and the yarn, so there was no need to purchase anymore as we have our own little craft shop in the closets…hiding… Next was to decide, thread or yarn, or both! I chose both. I had two forms, let’s try them out at the same time.
I found the colors closest to Christmas (soon found this would be great for any holiday really). What was in my arsenal were reds, blues, greens, whites and greys; so I choose greys and white for the first tree of thread and in my yarn stash, I chose light green and white.
I set up my table with my forms (I chose two sizes) newspaper, my choices of thread, a small Tupperware bowl and my glue.
Step 1: Untangle the thread, put it in the bowl, then poured glue on top of it. Remember when you were a kid and you put glue on your hands and peeled it off? Best thing EVER! You will get to do that again!
I didn’t remove the plastic wrap on the forms as it’s in experimental stages right now, I’m trying everything. If you wanted to, this would be when you would wrap your form in plastic.
Step 2a: Take the end of the thread (I didn’t separate the thread, it’s your choice if you want the fuller or skinnier effect), make sure it has plenty of school glue on it then stick it to the lowest part of the form. Wrap the thread around a few times to make sure it has a sturdy support system, then wrap the thread up and around the form, making sure you always have plenty of glue on the thread. I did two skeins of the lighter grey and two skeins of the white. Once I had it all wrapped like I wanted, I had to find my fingers in all the glue, so a quick trip to the sink to wash off my hands.
Step 2b: I did the same thing on the larger form, except, I used the spray glue. I lightly sprayed the form still in the plastic wrap, then wrapped some of the yarn up the form, making sure I had a nice foundation on the bottom of the forms so it would be able to stand. When I got about half way up the form, I lightly sprayed the already wrapped yarn and repeated wrapping and spraying until I had the coverage how I wanted.
***Note: you should do this outside for better ventilation. Also, I held the form as I sprayed it, it may have worked better if I had it sitting on some newspaper. Why? I glued my feet to the porch from the falling glue. Just sayin…
Step 1: Thread and school glue…notice the sticker
Thread, yarn and school glue
Part 3: Patience is a virtue~ Let the form set overnight or at least a couple of hours just to make sure it’s good and dry.
Part 4: Now, it’s time to remove them.
With the regular school glue, I went around the form and kind of squeezed it lightly and twisted to loosen it from the plastic wrap. Just another note, if you use the plastic wrap on the form, take off the sticker of identification, the glue loves to stick to that and I ended up with a weak area where the sticker was. Took some time to get it loose, but I also didn’t want to compromise it’s structural integrity, after all I was building a forest. Time was not my friend on this one, after a few hours, it started to droop a bit, so I went and found the starch and I sprayed that on the starch the tree. I did just a little bit at a time just to make sure it was evenly coated and because I didn’t want it too stiff, but no longer sagging.
The form with the spray glue and yarn didn’t work out so well. It wanted to stick to that plastic and forget about getting it off of the sticker. I ended up cutting off the plastic wrap and removing the form that way, instead of just sliding it like I had done with the thread. After I removed the yarn from the plastic wrap (it was very sticky, but still usable), I used yarn and thread to make a new one, I did the school glue method again and I wrapped first with thread and then with yarn.
Even though the craft store had it’s Christmas crafting goodies out, they didn’t have any tiny decorations I was looking for, so I improvised. I purchased some of the berry sticks from the floral department and then snipped them off the branch to use. I used the glue gun, please remember, they can be a HOT glue gun and the glue does get HOT!
The white one is the thread one. I think if I had used more thread, it may have stood up better. And yes, the white one is leaning.
left tree: thred right tree: yarn & thread
left tree: thred right tree: yarn & thread
If one takes pride in one’s craft, you won’t let a good thing die. Risking it through not pushing hard enough is not a humility.